Feed rate override misuse – fix by machine monitoring

Feed rate manipulation – an easy solution through machine monitoring

Feed rate override misuse is a common problem on CNC turning centers and machining centers. The operator runs the machine at a feed rate override greater than 100 % to produce parts at a faster rate than has been designed or planned. This results in high tool wear and poor surface finish on the part.

Feed rate override misuse causes a lot of problems, but is fixed easily by machine monitoring.

Here are a couple of examples of misuse of feed rate override. 1. In the first half of the night shift, the operator runs cycles at a feedrate override of 150 % to increase production. He then sleeps in the second half of the shift. 2. In all the shifts operators run at a feed rate override of 150 %. In the night shift the operator sleeps right through the shift, but the shortfall in production has been taken care of by overproducing in the first and second shifts. This misuse is easily detected with a machine monitoring system. For example, see this report from LEANworx Industry 4.0 based machine monitoring system. The green bars are cycles, and the red ones are the downtimes for part unloading and loading, between cycles. After the first 3 cycles, the cycle time has dropped from 2 minutes 8 seconds to 1 minute 46 seconds. This shows that the feed rate override has increased by 20 %.

The system just shows me feed rate override misuse. How do I fix it ?

To fix this issue, there is only one thing you need to do. Install the machine monitoring system and make this data visible to all the operators. Everybody’s data is visible to everybody else. There is no need to talk to anyone or make a big noise about it. The problem will go away on its own, when the operators doing this realize that their poor work ethic is visible to everybody else. Want to know more about how LEANworx can help you implement machine monitoring and Industry 4.0 rapidly and economically ? Click here.


The pesticide-loving pest in my park

On days that I don’t cycle to work I take the public transport, and end up not getting any exercise. My exercise on such days is a walk in a park about a km from home – not as good as my 25 km cycle commute to work, but better than nothing. It’s not a popular park because it is small (a circuit around the walking track is just 250 m, so you’ve got to walk 4 rounds for a km), and it has more brownery than greenery.

I however prefer it to a couple of other parks near my home because it is not popular. The other parks have pedestrian traffic jams, and you’ve got to dodge around people. Even worse, every few meters you meet someone you know from the locality, and have to stop and talk to them for a few minutes. There’s just a handful of people who walk in this unpopular park, so it’s very popular with birds – mynahs, coucals, parakeets, babblers, hoopoes, crows, sunbirds.

The park has one very big pest, who’s the gardener. This guy is convinced that the garden exists because of him, but I think it’s in spite of him. Although there are no pests other than him, from time to time he gets into the mood of spraying pesticide over all the foliage. This of course leaves a residual smell for a few days and ruins my walks – I keep thinking I’m breathing in instant death with every breath I take.

A conference of mynahs in progress
A babbler checking to see what the commotion is all about

This morning I saw a group of mynahs having a noisy conference on the ground, with a couple of babblers adding their unsolicited and unwelcome advice. I wonder what the collective noun for a group of mynahs is (like a pride of lions or a herd of cattle) ? If there is no word as yet, maybe it should be a conference of mynahs ? Some collective nouns for animals are really weird: like a murder of crows, a lamentation of swans, or a bastard of cats. So if a cat says “Hi, you bastards” to a bunch of other cats he’s just saying “Hi, you guys” and is not going to be instantly butchered by the bastards . (You can’t imagine how good it feels to be able to use the word bastard repeatedly, legitimately, and not be accused of using unparliamentary language in a technical blog).

Here’s the whole list of collective nouns for animals.

About his blog from LEANworx: Plug-and-play Industry 4.0 system for MSMEs.

Share :

Leave a Reply